Install Nest Doorbell (battery)

Start hither if you take a new Google Nest Doorbell (bombardment), or if you've removed your Nest Doorbell (bombardment) from the app and want to add together information technology dorsum.

You lot demand the app to connect your doorbell to Wi-Fi and go recorded video, so you lot should ever use the app as your primary guide to set upwardly and install your doorbell.

Here'due south a brief overview of steps to become started with wired or battery-only installation, along with some important troubleshooting.

This article just applies to the following device:

Nest Doorbell (battery)

More than installation help

For help with installation of the Nest Doorbell (wired), go to our Install Nest Doorbell (wired) commodity.

Yous can also find instructions to install the Nest doorbell with an indoor power adapter.

Installation videos

Bombardment-powered installation

How To Install Your Battery-Powered Nest Doorbell Wire-Free

Wired installation

How To Install Your Nest Doorbell With Existing Chime Wires

Bombardment-powered installation

ane. Check that you take everything for installation

Check that you take all the parts included in the box.

What's included in the box:

  • Nest Doorbell (bombardment)
  • Wall plate
  • Wedge
  • Wire extenders (Notation: You won't need these for battery-powered installation.)
  • Screws
  • Wall anchors
  • Spacers
  • Unlock tool
  • USB-C to USB-A charging cable

Need a wedge?

The Nest Doorbell (battery) already comes with a wedge that yous tin use to adjust the doorbell's camera angle if it's located in a corner. This wedge can angle your doorbell horizontally upward to 20°.

If your doorbell needs a wider horizontal bending or if you demand to adjust the angle vertically, yous tin purchase a Fabricated for Google doorbell wedge.

Tools:

  • Phillips screwdriver
  • Power drill
    • Phillips drill chip
    • 1/four in (6.five mm) drill chip (for wall anchors)
    • 3/32 in (2 mm) drill scrap (optional, to drill into hard materials like brick and stucco)
  • Bubble level (to cheque doorbell alignment)

App and internet requirements:

  • The Google Habitation app
  • A uniform phone (to connect to Wi-Fi and employ the Home app)
  • Your Wi-Fi network name and password
  • A broadband cyberspace connectedness, with at least two Mbps for your doorbell

Utilise a Google Home or Nest speaker or brandish (recommended)

Your doorbell can't use your habitation's doorbell chime with battery-powered installation. Then if you desire to get notified when someone rings your doorbell when you lot're home, connect a Google speaker or display and ready visitor announcements.

ii. Charge the doorbell before installation

Use the included USB cablevision to fully accuse your doorbell for bombardment-powered installation. Keep it plugged in during setup so that it can connect to the app and the Wi-Fi network.

The status light volition pulse white when your doorbell is charging, and volition announced solid white when it's completely charged.

3. Connect the doorbell to the app with the QR code

Follow the steps below to add your doorbell to the app and begin installation.

  1. If you haven't already, download the Google Home app from the Apple App Shop or Google Play Store.
  2. Open the Home app Google Home app. If prompted, sign in with your Google Business relationship.
  3. On the home screen, tap Add device or service .
  4. Select Set upwardly device plusNew device.
  5. Cull the home y'all want to add together your doorbell to, or select Add some other home to create a new i. Then, tap Next.
  6. The app will try to look for nearby devices. If prompted, select the Nest Doorbell battery as the device you want to prepare.
  7. Use your phone's photographic camera to scan the QR code on the back of the doorbell. You can likewise tap Continue without scanning and enter the numbers near the QR lawmaking.
  8. The app will help walk you through setup and installation.

4. Troubleshoot if needed

During setup, the app lets you connect your doorbell to Wi-Fi, personalize settings, check the video quality, and more than.

If you have any issues, here are some quick tips.

Connection bug

If you can't detect your Wi-Fi network, or if your doorbell has trouble connecting to the Wi-Fi, hither are a few things you lot can practice to try and fix the issue:

  • Look a few minutes, then try to connect your doorbell once more.
  • If possible, move your doorbell and router closer to each other to improve the signal.
  • Reduce wireless interference.
  • Endeavor restarting your router.
  • If you take a subconscious Wi-Fi network, you'll need to type in the network name (SSID) manually in the app.

For more tips, go to our Troubleshoot calculation Nest photographic camera to the app article.

Power issues

Signs that your doorbell isn't getting enough power include the post-obit:

  • Your doorbell won't turn on.
  • You go a message or status in the app telling you there isn't enough power.
  • Things like the Wi-Fi connection and the video quality tin can also be reduced when there isn't enough power.

Recharge your battery when the app tells you its battery is low. If the bombardment seems to drain faster than it should, try to adapt settings to save more than battery.

Video quality bug

If your doorbell is having video delays or lag, it's normally a sign that the Wi-Fi connection is weak. It could also be a sign that your doorbell doesn't take plenty power. Try the following to try to fix the issue:

  • If possible, move your doorbell and router closer to each other to improve the signal.
  • Reduce wireless interference.
  • Recharge your doorbell when the battery is depression. If this is a recurring outcome, try to adjust settings to save more battery.

If your doorbell'south video is distorted, here are a few things yous tin can try to fix the issue:

  • Dust off the photographic camera lens.
  • Ensure your doorbell is shaded and protected from farthermost atmospheric condition conditions. While Nest doorbells are built to work outside of your home, farthermost hot or cold temperatures can affect things like the video quality.

For more tips, go to our Troubleshoot Nest camera video baloney commodity.

five. Employ your doorbell

Acquire more about Nest doorbell nuts, how to change settings, and more in our Get started using your Nest doorbell article.

Wired installation

1. Bank check compatibility and voltage requirements

While the Nest doorbell tin replace most wired doorbells, there are some cases where the doorbell system either doesn't give enough power or gives likewise much power. You lot should check that your current doorbell tin be replaced by the Nest doorbell.

Note: Nest Doorbell (battery) does non support directly connectedness to the transformer.

Check doorbell system compatibility with Nest doorbell

2. Check that you take everything for installation

Bank check that you take all the parts included in the box.

What's included in the box:

  • Nest Doorbell (battery)
  • Wall plate
  • Wedge
  • Wire extenders
  • Screws
  • Wall anchors
  • Spacers
  • Unlock tool
  • USB-C to USB-A charging cable

Need a wedge?

The Nest Doorbell battery already comes with a wedge that y'all tin use to accommodate the doorbell's camera angle if information technology's located in a corner. This wedge tin angle your doorbell up to 20°.

If your doorbell needs a wider angle to view of import activeness (Similar 35° to 55°), you can buy a Made for Google doorbell wedge.

Tools:

  • Phillips screwdriver
  • Ability drill
    • Phillips drill bit
    • 1/4 in (vi mm) drill bit (for wall anchors)
    • iii/32 in (2.38 mm) drill chip (optional, to drill into difficult materials similar brick and stucco)
  • Bubble level (to check doorbell alignment)

App and net requirements:

  • The Google Home app
  • A compatible phone (to connect to Wi-Fi and utilise the Home app)
  • Your Wi-Fi network proper noun and password
  • A broadband net connectedness, with at least ii Mbps for your doorbell

3. Charge your doorbell before installation

Utilise the included USB-C cable to charge your doorbell. Keep it plugged in during setup so that information technology tin can connect to the app and Wi-Fi network.

The status lite volition pulse white when your doorbell is charging, and will appear solid white when it'due south completely charged.

4. Turn the power off to your doorbell organisation

  1. Switch the power off for your doorbell and chime at your dwelling's breaker or fuse box. This volition protect you and your equipment during installation.
  2. Try to ring your doorbell to confirm that you've flipped the right switch to turn the power off. If needed, you can switch off the principal power at the breaker box instead.

5. Remove your old doorbell

Remove your old doorbell and disconnect the wires. You'll probably need a screwdriver for this stride.

Note: If yous plan to supersede the Nest Doorbell (wired), you'll need to remove the chinkle connector that came with it, also–your Nest Doorbell (battery) doesn't need it for wired installation.

Uninstall Nest Doorbell (wired)

Tip: As you remove your old doorbell, bend the doorbell wires or tape them and so they don't skid dorsum into the wall.

6. Connect the doorbell to the app with the QR code

Follow the steps below to add your doorbell to the app and brainstorm installation.

  1. If you oasis't already, download the Google Abode app from the Apple App Store or Google Play Store.
  2. Open up the Dwelling app Google Home app. If prompted, sign in with your Google Account.
  3. On the home screen, tap Add device or service .
  4. Select Set upward device plusNew device.
  5. Choose the home you want to add your doorbell to, or select Add another habitation to create a new one. Then, tap Side by side.
  6. The app will endeavor to look for nearby devices. If prompted, select the Nest Doorbell (battery) as the device yous want to set upwards.
  7. Utilise your phone's camera to browse the QR code on the back of the doorbell. You can also tap Continue without scanning and enter the numbers near the QR lawmaking.
  8. The app volition assist walk y'all through setup and installation.

7. Troubleshoot if needed

During setup, the app lets you connect your doorbell to Wi-Fi, personalize settings, check the video quality, and more.

If you take any issues, here are some quick tips.

Connexion issues

If you can't find your Wi-Fi network, or if your doorbell has problem connecting to the Wi-Fi, here are a few things you can do to attempt and fix the issue:

  • Look a few minutes, and then try to connect your doorbell over again.
  • If possible, move your doorbell and router closer to each other to improve the betoken.
  • Reduce wireless interference.
  • Try restarting your router.
  • If you accept a hidden Wi-Fi network, you'll need to type in the network proper name (SSID) manually in the app.

For more tips, become to our Troubleshoot adding Nest camera to the app commodity.

Power issues

Signs that your doorbell isn't getting plenty ability include the following:

  • Your doorbell won't plow on.
  • You get a message or status in the app telling you the bombardment is low.
  • Things like the Wi-Fi connection and the video quality can too be reduced when there isn't enough power.

For troubleshooting steps, go to our Troubleshoot battery bug for Nest camera and doorbell article.

Video quality bug

If your doorbell is having video delays or lag, it's unremarkably a sign that the Wi-Fi connection is weak. It could also be a sign that your doorbell doesn't take plenty battery. Effort the following to try to fix the issue:

  • If possible, move your doorbell and router closer to each other to ameliorate the signal.
  • Reduce wireless interference.
  • Troubleshoot battery bug for your doorbell.

If your doorbell's video is distorted, hither are a few things you lot tin can do to troubleshoot:

  • Dust off the camera lens.
  • Ensure your doorbell is shaded and protected from extreme conditions conditions. While Nest doorbells are congenital to work exterior of your home, extreme hot or cold temperatures can affect things like the video quality.

For more than tips, go to our Troubleshoot Nest camera video distortion commodity.

Chime issues

If you have a mechanical chime with moving parts and it didn't ring or didn't sound right, try the post-obit:

  1. Remove the chime embrace and check that the wires aren't touching whatever moving parts.
  2. Make certain that any exposed wire ends (with bare copper showing) aren't touching each other.
  3. Exam your chime again.

You can go more than assist to troubleshoot chime issues in our assist center.

viii. Use your doorbell

Learn more nigh Nest doorbell basics, how to modify settings, and more in our Get started using your Nest doorbell article.

Connect ability wires to Nest Doorbell

  • Before y'all connect the wires make sure they are make clean.
  • Connect the power wires to the wire connectors.
    • Information technology doesn't thing which connector y'all attach a wire to.
    • Printing down on the release tabs to insert the wires into the connectors.
    • If you see exposed wire, remove the connectors and trim any excess wire.
  • Important: Don't let the connectors touch the backplate. This can cause an electrical brusk and harm the doorbell. Make sure that they only touch the screws. Tighten the screws to secure the connectors.
  • Make certain the wires indicate down, non upwards, and so the extra wire can be tucked back into the wall.

Was this helpful?

How tin can we improve it?